APC Easy UPS AVR BV (650VA/375W, AVR, 6*IEC)
APC Easy UPS BV (800VA/450W, AVR, 4*Schuko)
APC EASY UPS BV 1000VA AVR Schuko 230V
APC Smart-UPS 2200VA LCD 230V with SmartConnect (SMT2200I)
| Output | Power Capacity | 1980 Watts / 2200 VA |
| Nominal Voltage | 230V | |
| Frequency | 47 - 53 Hz for 50 Hz, 57 - 63 Hz for 60 Hz | |
| Connections | (1) IEC 320 C19 (8) IEC 320 C13 | |
| Input | Voltage Range | 160 - 286 V |
| Frequency | 50/60 Hz +/- 3 Hz (auto sensing) | |
| Batteries | Volt-Amp-Hour | 783 |
| Type | Sealed Lead-Acid battery | |
| Management | Control Panel | Multi-function LCD status and control console |
| Alarm | Battery On::Low Battery::Configurable delays | |
| Interface Port | SmartSlot |
APC Smart-UPS C 1000VA LCD 230V (SMC1000I)
UPS topology: Line-Interactive, Output power capacity: 1000 VA, Output power: 600 W. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 8 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery life (max): 5 year(s), Battery recharge time: 3 h. Form factor: Mini tower, Product colour: Black, Display: LCD. Width: 171 mm, Depth: 439 mm, Height: 219 mm
APC Smart-UPS SRT 10000VA RM 230V (SRT10KRMXLI)
APC Smart-UPS SRT 2200VA RM 230V (SRT2200RMXLI)
UPS topology: Double-conversion (Online), Output power capacity: 2200 VA, Output power: 1980 W. AC outlet types: C13 coupler,C19 coupler, Power plug: IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 367 VAh, Typical backup time at full load: 3.9 min. Form factor: Rackmount/Tower, Product colour: Black, Rack capacity: 2U. Width: 432 mm, Depth: 584 mm, Height: 85 mm
APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI)
UPS topology: Double-conversion (Online), Output power capacity: 3000 VA, Output power: 2700 W. AC outlet types: C13 coupler,C19 coupler, Power plug: C20 coupler, Serial interface type: RJ-45. Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 505 VAh, Typical backup time at full load: 4 min. Form factor: Rackmount, Product colour: Black, Rack capacity: 2U. Width: 432 mm, Depth: 635 mm, Height: 85 mm
ExeGate DTM-1207 UPS battery 12V 7Ah
ExeGate DTM-1209 UPS battery 12V9Ah
ExeGate DTM-1217 UPS battery 12V17Ah
ExeGate DTM-1217 UPS battery 12V5Ah
ExeGate Power AVR AD5000-1000 (1000VA / 500W, range 150 … 280V, 4 euro sockets)
ExeGate Power EC-1,8P VDE-250V-3*0,5mm2 1.8m UPS
ExeGate Power EC-1P VDE-250V-3*0,5mm2 1m UPS
FSP UPS CHAMP CH-1103RS 3000VA ONLINE RT2700W PPF27A1105
| Manufacturer | FSP Group |
| View | Double Conversion UPS |
| output power | 3000 VA (active 2700 W) |
| Incoming power | 1-phase; from 120 to 300 V |
| Output signal | 1-phase, sinusoidal |
| Power output connectors | 7 pcs. |
| Functions and equipment | |
| Connection interface | USB |
| Batteries | charging 4 h |
| Other | |
| Dimensions (WxDxH) | 438x630x88 mm |
| Weight | 29.3 kg |
Mercury -Maverick UPS 750VA
Mercury Radiant 2400VA / 24V Inverter with LCD Display
| Model | 2.4KVA |
| Voltage | 230VAC |
| Capacity | 2400VA/1440W |
| Voltage Range | 170-280VAC (UPS Mode) 90-280 VAC (INV Mode) |
| Voltage Regulation(Battery Mode) | 230VAC +/-10% |
| Transfer Time | 20 ms Typical |
| Waveform | Modified Sine Wave |
| Battery Voltage | 24V |
| Floating Charge Voltage | 27.00VDC +-0.5 |
| Charge Current | 10/20A |
| Dimensions | 330 x 227.8 x 92.5 |
| Net Weight (Kgs) | 2.8 |
| Gross Weight (Kgs) | 3.3 |
Mercury UPS Maverick 1050VA
Mercury UPS Maverick 1550VA
Mercury Ups Maverick 850Va
UPS FSP Champ CH-1101RS 1000VA ONLINE RT900W
- True double conversion
- Microprocessor control optimizes reliability
- Input power factor correction
- Output power factor 0.9
- Wide input voltage (120V-300V)
- Converter mode available
- ECO mode for energy saving
- Generator compatible
- Smart SNMP works well with either USB or RS-232
- Comprehensive display allows easy monitoring and access of UPS status
UPS FSP CHAMP CH-1103TS 3000VA ONLINE T2700W (PPF24A1823)
UPS Mercury Elite 3000 Smart
- Microprocessor Controlled - Guarantees High Reliability
- Equipped With Boost and Buck AVR
- Green Power Function for Energy Saving
- DC Start Function
- AC Overload Protection
- Low Battery Voltage Indication
- Full Protection: Discharge, Overcharge and Overload Protection
- Load Level % Indication
- Wide Input Voltage Range (140~300VAC)
- Light Weight - Compact Design
- LCD Display
APC Back-UPS 950VA, 230V, AVR, IEC Sockets
Output power capacity
480Watts / 950VA
Max Configurable Power (Watts)
480Watts / 950VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
50/60 Hz +/-1 Hz
Output Frequency (not synced)
50/60 Hz +/-1 Hz
Topology
Line Interactive
Waveform type
Stepped approximation to a sinewave
Output Connections
(1) IEC Jumpers (Battery Backup)
(6) IEC 320 C13 (Battery Backup)
Transfer Time
8ms typical : 10 ms maximum
Mercury ELITE 1000 PRO UPS
| Input Voltage | 220VAC |
| Input Frequency | 50Hz |
| Input Phase | Single Phase |
| Input Socket | with FUSE |
| Cold Start (0~100% load) | Press the ON / OFF Switch |
| Input Range (220V) | 140V~285V |
| Normal Frequency | 50Hz |
| Rating Output (VA) | 1000VA |
| Rating Output (W) | 600W |
| Waveform | Battery Mode (Simulated Sine Wave) AC Mode (Sine Wave) |
| Power Factor | 0.6 |
| Rating Voltage | 220V |
| Output Range | 220VAC +17~22% (No Load Connected) |
| Rear Output Socket | 3x IEC - Battery Backup |
| Transfer Time | Typical 8ms (max 15ms) |
| Short Circuit Protection Line Mode | FUSE & Software Protection 100%~120% (gives alarm & shut down in 3min) 120%~130% (beeps alarm & shut down in 30s) >130% (shut down immediately) |
| Battery Mode | Software Protection controlled by CPU 100%~110% (gives alarm & shut down in 10s) >110% (shut down immediately) |
| Battery & Runtime Rating | 12V / 9AH x1 |
| Battery & Runtime Backup Time | Typical 8mins~20mins |
| Battery & Runtime Change Current | 1.5A (max) |
| Battery & Runtime Over Charge | >14.8V ±0.5 (Stop Charging) |
| Battery & Runtime Protection | <13.5V ±0.5 (Recharge) |
| Weight (kg) | 7.5 |
| Dimension (mm) | 370 x 145 x 230 |
| Master Carton (mm) | 393 x 310 x 267 (2pcs) |
| Output Rating Frequency | 50Hz |
| Output Line Mode | Synchronize with the Utility |
| Output Battery Mode | 50Hz ±1Hz |
Mercury Elite 2000 Pro UPS
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal - Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time - Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
| Net Weight (kgs) | 12.7KGS |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise Level | Less than 45dB |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
| Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Mercury ELITE 650 PRO Line UPS
| Input voltage | 220VAC |
| Input frequency | 50Hz |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF switch |
| Input range (220V) | 140V-300V |
| Rating output (VA). | 650VA |
| Rating output (W). | 390W |
| Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
| Power factor | 0.6 |
| Rating voltage | 220V |
| Output range | 220Vac-7%+15% ( in battary mode ) |
| Rear Output Socket | 2xUniversal - Battery backup |
| Transfer time | TYPICAL 4-8 ms |
| Communication Interface | NIL |
| Rating frequency | 50Hz |
| Output Frequency Line-mode | Synchronize with the Utility |
| Battery mode | 50 Hz±1Hz |
| Output Frequency Line Mode | Synchronize with the utility |
| Short Circuit Protection Line Mode | FUSE & firmware protection |
| Battery Mode | Software protection controlled by firmware |
| Overload Protection Line Mode | 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) |
| Battery Mode | 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
| Rating frequency | 12V/8.2AH x 1 |
| Backup Tim - Typical | 10mins to 18mins (depending on load) |
| Charge Current | About 1A at normal mode |
| Over Charge Protection | >14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge |
| Weight | 5.6kg +/- 0.3Kg |
| Dimension | 390x 145 x 220 (mm) |
| Master Carton | 45.5 x 40 x 23.5 (cm) (4pcs) |
Mercury ELITE 850 PRO Line UPS
| Input | . |
| Input Voltage | 220VAC |
| Input Frequency | 50Hz |
| Input Phase | Single phase |
| PowerCord | Built-in Cable with Fuse |
| Input Voltage Range | 140~300VAC |
| Output | . |
| Rating Output | 850VA |
| Wave Form | Battery Mode (Simulated Sine Wave) AC Mode (Synchronize with Input) |
| Rating Voltage | 220V |
| Output Range | 220VAC-11% to +17% (Battery Mode) |
| Rear Output Socket | 2xUniversal-Battery Backup |
| Transfer Time | Typical 4-8ms |
| Communication Interface | Nil |
| Output Frequency | . |
| Rating Frequency | 50Hz |
| Line Mode | Synchronize with the Utility |
| Battery Mode | 50Hz±1Hz |
| Short Circuit Protection | . |
| Line Mode | Fuse & Firmware Protection |
| Battery Mode | Firmware Protection |
| Overload Protection | . |
| Line Mode | 110%±5% (go to fault mode after 5 minutes) 120%±5% (go to fault mode immediately) |
| Battery Mode | 85%±5% (Shut down after 5 seconds) 100%±5% (shut down immediately) |
| Battery and Runtime | . |
| Rating | 1x12V/9AH |
| Backup Time - Typical | 15mins~25mins (Depending On Load) |
| Charging Current | About 1A at Normal Mode |
| OverCharge Protection | 14.5V±0.2V(Stop Charging) <13.5V±0.5V(Recharge) |
| Packaging | . |
| Dimension(mm) | 350x142x213 |
| Master Carton(mm) | 365x304x446 |
| Packsize per Master Carton(mm) | 2 |
Mercury Elite1500 Pro UPS
| Input | . |
| Input Voltage | 220VAC |
| Input Frequency | 50Hz |
| Input Phase | Single Phase |
| PowerCord | Built-in Cable with Fuse |
| Input Voltage Range(May vary as per Country requirement) | 140~300VAC |
| Output | . |
| Rating Output | 1500VA |
| Wave Form | Battery Mode (Simulated sine Wave) AC Mode (Synchronize with Input) |
| Rating Voltage | 220V |
| Output Range | 220VAC - 11% to + 17% (Battery Mode) |
| Rear Output Socket | 4x Universal - Battery Backup |
| Transfer Time | Typical 4-8ms |
| Communication Interface | Nil |
| Output Frequency | . |
| Rating Frequency | 50Hz |
| Line Mode | Synchronize with the Utility |
| Battery Mode | 50Hz±1Hz |
| Short Circuit Protection | . |
| Line Mode | FUSE & Firmware Protection |
| Battery Mode | Firmware Protection |
| Overload Protection | . |
| Line Mode | 110%±5% (go to fault mode after 5 minutes) 120%±5% (go to fault mode immediately) |
| Battery Mode | 85%±5% (shut down after 5 seconds) 100%±5% (shut down immediately) |
| Battery and Runtime | . |
| Rating | 2x12V/8.2AH |
| Backup Time - Typical | 30mins~40mins (Depending On Load) |
| Charging Current | About 1A at Normal Mode |
| OverCharge Protection | 29V±0.2V(Stop Charging) <27V ±0.5V(Recharge) |
| Packaging | . |
| Dimension(mm) | 388x203x260 |
| Master Carton(mm) | 425x403x280 |
| Packsize per Master Carton(mm) | 2 |
